Practical knowledge from 14+ years of building industrial mixers. New articles every week.
All three are vacuum emulsifying mixers from Ginhong, but they're built for different production scales and cleaning workflows. This guide helps you pick the right one based on your batch size, GMP requirements and budget.
5 min read · Updated this week
3000 rpm sounds fast, but is it always the right setting? We explain the relationship between rotor tip speed, viscosity and final particle size, with data from real customer formulations.
7 min read · Engineering notes
When a pharmaceutical contract manufacturer upgraded from manual mixing to our RS-300, they didn't just save time — they also reduced batch-to-batch variation to under 1%. Here's how we engineered the change.
4 min read · Customer story
Planetary mixers (PD/PX series) handle high-viscosity applications that standard mixers can't. Before you commit, ask these 5 questions about your formulation, your facility, and your future needs.
6 min read
Mechanical seals on the homogenizer shaft are the most common maintenance item. Here's the typical replacement interval, what to keep in your spare parts inventory, and how to extend seal life.
5 min read · After-sales guide
"CE certified" gets used loosely. Here's exactly what our CE certification covers (Machinery Directive, Low Voltage Directive, EMC) — and what it doesn't (e.g., ATEX for explosive atmospheres).
4 min read
Tell us what you'd like to learn about industrial mixing. If it's a common question, we'll write a deep-dive article about it.
Suggest a Topic →